MONARCH INSTRUMENT Nova-Pro 300 Instruction Manual Download Page 38

Page: 38 / 40

11.2.3 Energy Eﬃciency

This product complies with the U.S. Department of Energy’s

energy conservaon standards speciﬁed in the Code of Federal
Regulaons

10 CFR 430.32(z) and is registered in the DoE CCMS

database.

12. OPTIONS, ACCESSORIES and SENSORS

Laser Module

Oponal docking staon for Laser

Module which can be removed from
the Nova-Pro to be used as an external
laser sensor. Comes with blanking
panel for Nova-Pro

AC Adapter

Replacement/oponal 115/230 Vac 50/60 Hz

AC Adapter with 6 foot (2 m) cable with USA,
UK, AUS, Euro adapter plugs

Charging Staon

Replacement Charging Staon for

Nova-Pro Li-

Ion Baery Packs. Includes

115/230 Vac power supply with USA,
UK, AUS, Euro adapter plugs

Charger Power

Replacement power supply for use with Charging

Staon: 115/230 Vac with USA, UK, AUS, Euro adapter

plugs

Baery Pack

Replacement Standard Li-

Ion Baery Pack

Standard

Latching carrying case for Nova-Pro with provision for
accessories (included with Nova-Pro 300 Kit)

Deluxe

Deluxe water-

ght latching carrying case for Nova

-Pro

with provision for accessories (included with Nova-Pro
500 Kit)

Dock

Supply

Carry Case

Summary of Contents for Nova-Pro 300









































Search results

Summary of Contents for Nova-Pro 300

Reviews:

Related manuals for Nova-Pro 300

Brands by name

Popular brands

MONARCH INSTRUMENT Nova-Pro 300, Instruction Manual

Search results

Summary of Contents for Nova-Pro 300

Reviews:

Related manuals for Nova-Pro 300

Brands by name

Popular brands