26
7.1
Internal Phase Delay (JOG)
In the internal STROBE Mode the Delay is relave and no external
trigger is used. This is referred to as JOG. Once the flash rate has
been adjusted to give a stopped moon image, the JOG buons
(
and
icons on the touchpad) may be used to increase or
decrease the phase of the image with respect to its original posion
by the amount set in the JOG Menu.
Use this feature to bring a reference mark, such as a keyway, into
your line of sight. It may be necessary to adjust the flash rate to
keep the target stac if the speed is dri3ing.
Use the JOG Menu to set a PHASE Delay of –30°.
The display will show PHASE with the le3 and right
arrow icons. Use the joysck to adjust the flash rate to stop moon
of the rotang object. Then use the
and
icon touch buons to
move the phase of the objects as shown in Figure 8.
Figure 8 Phase Shi4ing by
–30°, –60°, –90°
7.2
External / Laser Delay
There are three External Delay Modes:
Phase Delay
,
Time Delay
and
Auto (Virtual RPM)
. These modes are only acve if an external
trigger source is available via the internal Laser Module or an
external sensor.
PHASE
◄
►
STOP MOTION
-30°
-60°
-90°
