Press the MENU button
to enter the MEMRY menu.
Use the right arrow
on the joysck to toggle between SM
(Save Memory) or RM (Recall Memory).
5.5.1
Save Memory
To STORE the current strobe se(ng into a memory locaon:
Once in the Memory (MEMRY) menu, press the
arrow
on the joysck to enter the Save Mode indicated by SM
on the display. Use the
and
arrows on the joysck
to select one of the memory locaons in which to save
the se8ngs
—SM1, SM2...SM10.
Press the MENU buon
followed by the Power buon
to save the current strobe se8ng into the displayed
locaon. The current flash rate will then be shown in that
locaon.
To exit without saving a value press the POWER buon .
5.5.2
Recall Memory
To RECALL a saved strobe se(ng:
Once in the Memory (MEMRY) menu, make sure the you
are in the Recall Mode as indicated by RM on the display.
Use the
and
arrows on the joysck to select one of
the memory locaons from which to load the se8ngs
—
RM1, RM2...RM10.
Press the MENU buon
followed by the Power buon
to recall the se8ng from the selected locaon.
To exit without recalling a memory locaon press the Power
buon .
20
