5.4.2
UNITS Menu
This menu opon selects the Engineering Units used to display
the flash rate or speed. The choices are:
FPM
- Flashes per Minute (Not available in TACH Mode)
FPS
- Flashes per Second (same as Hz, not available in TACH Mode)
RPM
-
Revoluons per Minute
RPS
-
Revoluons per Second (same as Hz)
Press the MENU buon
to enter the UNITS menu. Unit
is shown on the top line with the current engineering unit on
the lower line. The On-Target indicator
will be on for the
currently selected value.
Use the arrows on the joysck to select the desired value.
Press the MENU buon
followed by the Power buon
to save the value.
To exit without se8ng the units press the Power buon .
5.4.3
INPUT Menu
This menu sets the pulse polarity of the external signal that will
trigger the strobe. The opons are
nEG
for negave edge or
POS
for posive edge.
Press the MENU buon
to enter the INPUT menu. The
current edge se8ng is shown on the top line with INPUT on the
lower line. The On-Target indicator
will be on for the
currently selected value.
Use the arrows on the joysck to select the desired value.
Press the MENU buon
followed by the Power buon
to save the value.
To exit without changing the polarity press the Power
buon .
18
