Monaco DIPLOMAT 2004, Owner'S Manual

Page: 257 / 446

6 • 257
WATER SYSTEMS
DIPLOMAT 2004
The toilet operates from either the fresh water tank or city water supply.
The water pump must be turned on or the city water connected. The toilet
flushes directly into a sewage holding tank (black water).
Water consumption is dependent on incoming supply pressure and flow
rates. To help conserve water when dry camping or without water hook-ups,
two modes to flush the toilet are available and are controlled using a switch
located behind the toilet on the right side, as viewed from the front. A mirror
may help locate it.
• To flush in Residential mode, move switch to Residential Flush
position and push large button once and release.
• To flush toilet in User Control model, move switch to User
Control Water Saver position and hold down button for as long
as you want to flush and then release. This mode provides water
conservation of 50% or more.
• To add water to the toilet, press and hold the small button until
the desired water level is reached. Generally, more water is
required when flushing solids.
• Pressing both buttons twice simultaneously opens the flush valve
to access the holding tank to add chemicals. Pressing the flush
button again will close the valve.
In the event the 12 Volt DC is lost at the toilet, the valve can be manually
opened using the override knob located in the back of the toilet.
040432C
TOILET
- THETFORD
OPERATING
INSTRUCTIONS