Monaco DIPLOMAT 2004, Owner'S Manual

Page: 164 / 446

DIPLOMAT 2004
4 •164
APPLIANCES
Manual Mode:
When one of the two manual modes is selected:
1. AC = The refrigerator is operating on AC electric.
2. LP = The refrigerator is operating on LP-Gas.
If the LP-Gas does not ignite within 30 seconds, the control changes
to a different energy source or the gas safety valve closes and F displays.
Turn the refrigerator off then back on. If the gas does not ignite after
several attempts, consult a dealer or authorized Norcold service center.
Automatic Mode:
The refrigerator selects AC power over LP-Gas in Auto mode ( AU ).
The controls select the energy source in this sequence.
1. When 120 Volts AC is available " AU AC " flashes in the display.
This indicates the refrigerator is operating on AC electric. After ten
seconds, the "
AU AC " goes off and only a power indicator remains.
2. If 120 Volts AC is not available, " AU LP " flashes in the display. This
means the refrigerator is operating on LP-Gas.
3. After the refrigerator is operating, press the TEMP SET button and set
the desired temperature.
• ON/OFF Button - Turns the refrigerator on or off.
- Push the ON/OFF button to start the refrigerator in Auto mode.
- Push and hold the ON/OFF button for two seconds to shut it off.
• LED Display - This screen is used for mode, temperature and
fault code display.
• MODE Button - Controls the operation mode of the refrigerator.
- Push and hold the MODE button to select between Automatic
AU, AC or LP operation.
• TEMP SET Button - Adjusts the temperature.
- To adjust push and hold the TEMP SET button.
- Number " 9 " is the coldest setting.
The Refrigerator Control Panel requires 12 Volt DC to operate.
030864
Control Panel
- Four Door
(Optional)