molex Brad HarshIO 300 ePN, User Manual

Page: 22 / 56

HarshIO 300 ePN

22

IP67 Digital I/O Modules for PROFINET IO
Fieldbus
Ethernet connectors 2x M12 Ultra-Lock, 4-pin, female, D-Coded, stainless steel, shielded
IP assignment DCP, DCP with auto naming (3x rotary switches)
Protocol PROFINET IO according PI specifications v2.2
Communication Class Real Time Conformance Class-B (RT CC-B)
Data access

Cyclic data exchange
o
Input and output process data
o
I/O diagnostics

Acyclic data exchange
o
Alarms
o
Reading module configuration settings
o
Reading module diagnostic data
o
Instructions and Maintenance services (I&M)
Cyclic connection 1x IO-Controller connection
Acyclic connection Max up to 4 simultaneous requests
Integrated Switch

2x ports integrated switch

Speed: 100Mbps

Auto negotiation

Auto crossing

Auto polarity

1x status led per port

Storm Protection against network loop (Broadcast, Multicast and Unicast packets)
Daisy Chain (Ethernet) Up to 8 HarshIO
Module performance Manage up to 3000 packet/sec
Refresh Period from 1 ms up to 512 ms (default 16 ms)
LLDP Yes (Sender / Receiver)
GSD file Yes
Easy Device Replacement Yes (based on LLDP)
SNMP Server according v1/v2
Module factory settings:
PROFINET name molex-harsh300-ip67
Rotary switch Position 700
IP address: 0.0.0.0
Subnet mask: 0.0.0.0
Gateway: 0.0.0.0
ETH1 port: Auto negotiation / Auto MDIX
ETH2 port: Auto negotiation / Auto MDIX
LLDP: Enabled
Easy Replacement: Enabled
Module identification: Each HarshIO has a unique Ethernet MAC address printed on the back of the module.
This address is unique and has a fixed length of 6 bytes (48 bits) built with the manufacturer’s ID, the product
family and the module’s serial number.
Manufacturer ID Family Serial Number
00.A0.91 72 XX.XX