RHT5758-CC Hand Crimp Tool
Doc No. 64001-1000
Release Date: 12-11-02
UNCONTROLLED COPY
Page 4 of 6
Revision: B
Revision Date: 09-02-03
Tool Calibration
A Certificate of Calibration (see last page) was supplied with the tool. To
recalibrate this tool, pin gauge measurements should be taken in each
conductor nest and compared to this chart. The tool should be lubricated
prior to recalibration to ensure consistent measurements. Handle preload is
factory set to 25-45 LBS. See How to Adjust Tool Preload (See Figure 5) to
recalibrate.
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital components are long-
life tested. All tools are warranted to be free of manufacturing defects for a period of 30 days. Should such a defect occur, we will
repair or exchange the tool free of charge. This repair or exchange will not be applicable to altered, misused or damaged tools. This
tool is designed for hand use only. Any clamping, fixturing, or use of handle extensions voids this warranty.
Hand held crimping tools are intended for low volume, prototyping or repair requirements only.
Wire Range
“X” Dimension
Conductor Crimp
Nest
Color
Code
AWG
mm²
Mean
Go
No Go
Crimp
Inspection
Marking
Blue
14 - 16
1.30 - 2.00
.094
.091
.098
o
PIN GAUGE IN
CONDUCTOR CRIMP
“ Confining ” Crimp
X
Caution:
Repetitive use of this tool should be avoided
.
