Mold-Masters Hot Runner, User Manual, Page: 180 / 319

14.6.4 Assemble the Magnetic Retainer to Magnet Holder
1. Hold the magnet assembly in your hand.
2. Use a 5 mm (0.2 in.) hex key and assemble the magnet retainer to the
magnet holder with a torque of 27 to 30 Nm (20 to 22 lbf-ft).
14.6.5 Place the Magnet Holder and Magnet into the
Housing
1. Install the magnet holder and magnet into the housing.
2. Use a 5 mm (0.2 in.) hex key and rotate the magnet holder in a counter-
clockwise direction until the threaded part protrudes.
14-8
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
MAG-PIN OPTION
Hot Runner User Manual