5-38
Dura+ User Manual
ASSEMBLY
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
Inlet Extension with Heater Sleeves - continued
2. Apply anti-seize compound to the screws and install inlet to manifold.
3. Torque screws in a crossing pattern, gradually increasing torque to
specified value. Refer to the General Assembly drawing for torque values.
4. Remove inlet to verify blue surfaces.
5. Clean the die spotting blue compound from the inlet and manifold.
6. Reinstall inlet. Torque screws in a crossing pattern, gradually increasing
torque to specified value. Refer to the General Assembly drawing for
torque values.