7-4
Dura+ User Manual
ACCU-LINE™
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
IMPORTANT
Step 5 is optional for systems that have cooling lines within the plates.
Please refer to the General Assembly drawing for the location of the bottom
ports for cooling connections.
5. Insert the plugs into the supply ports of the cylinder and seal the lines.
In / out cooling lines from customer plate
6. Apply grease to the O-ring assembly grooves in the outer surface of the
piston.
7.
Use your fingers and gently push the O-ring into the groove in the piston.
Make sure that the O-ring seats firmly in the groove.
Accu-Line
™
with Valve Insert Assembly - continued