Mohawk V-035-A-X, Operation And Maintenance Manual

Page: 33 / 112

MV-A00000920 MOHAWK V-A SERIES: VERTICAL RISE DRIVE-ON MANUAL 35,000 - 64,000 LB MODEL 4-5
4.4. Connecting the lift
Follow the sequence of operations given below:
1. connect the hoses provided, which lead out of the control unit with
their respective inputs to the lift
(see paragraphs: Hydraulic, pneumatic, electrical connection).
2. Fill the circuit MASTER/SLAVE and remove air from the same
circuit.
(see paragraphs: Filling of the circuit Master-Slave )
3. Fix the legs of the lift with the raw plugs at the correct distance and
perfectly levelled.
(see paragraphs: Lift position and Anchorage capsule installation )
4. Carry out all due tests before using the lift.
(see paragraphs: Check and Checks before use )
The control unit must be positioned so that the operator has a full
view over the lift area.
4.5. Connecting
the lift’s commands
4.5.1. Hydraulic connections

Open the control unit door

Bring the hydraulic hoses from the lift to the control unit, through the
hole at the base of the control unit.

Join the hoses to the hydraulic blocks (see photo).