Mohawk V-035-A-X, Operation And Maintenance Manual

Page: 32 / 112

MV-A00000920 MOHAWK V-A SERIES: VERTICAL RISE DRIVE-ON MANUAL 35,000 - 64,000 LB MODEL 4-4
4.3. Place of installation
The free space around the table must satisfy applicable regulations and
be no less than 700 mm or 27,5 inches.
The control unit must be positioned so that the operator has a full
view over the lift area.
To install the anchor capsules, the foundation must have the following
characteristics:
FOUNDATION
Tamped
THICKNESS OF CONCRETE

20 cm / 8 inches
CONCRETE RESISTANCE CLASS

C 25 / 4000 psi
IMPROVED ADHERENCE STEEL GIRDERS Type FeB 44 K
REINFORCEMENT GIRDERS FOR LARGE
SURFACES
Electro welded mesh
REINFORCEMENT GIRDERS FOR SMALL
SURFACES
Bent irons
FLATNESS

1 / 1000
If the floor characteristics are not available, foundations must be
provided underneath the lift's clamping holes.
“Ensure a qualified person should be consulted to address seismic loads
and other local or state requirements”.
MAX.GROUND PRESSURE (*)
Kg/cm
2

5
psi 70
The lift must in any case be fastened to the floor using
dedicated chemical anchor capsules.
(*) press calculated under the base plates.
WORK AT A ROOM
TEMPERATURE OF
-10 TO 40 ° C.
14 TO 104 °F