Mohawk TR-110, Manual

Page: 17 / 76

MOHAWK MODEL TR-110 & TR-120
17
ASSEMBLE THE TWO TRACK STOPS TO THE FORE
END OF THE MAIN AND OFF SIDE TRACK USING
THE EIGHT 3/4 - 16 NF X 3 - 1/2 IN BOLTS AND 3/4 -
16 NF NYLON LOCK NUTS.
FOLLOWING THE INSTRUCTIONS FOR RAISING
AND LOWERING THE UNIT, AGAIN CYCLE THE
UNIT. AFTER RAISING THE UNIT FULLY LOWER
THE UNIT.
WITH THE UNIT FULLY LOWERED, ADJUST ALL
FOUR EQUALIZING CHAINS TO REMOVE ANY
REMAINING SLACK. ALL FOUR CHAINS ARE TO BE
TAUT
.
AFTER THE UNIT IS RUNNING PROPERLY,
MATCH DRILL AND ANCHOR ALL THE
BASE PLATES TO THE FLOOR USING
ANCHOR BOLTS PROVIDED. REFER TO
ANCHOR
BOLT INSTALLATION
INSTRUCTIONS ENCLOSED.