Mohawk TR-110, Manual

Page: 23 / 76

MOHAWK MODEL TR-110 & TR-120
23
TO BE USED IN CONJUNCTION WITH DRAWING NUMBER 110-004-090
1. ALL ELECTRICAL EQUIPMENT AND WIRING SHALL CONFORM TO ANSI/NFP 70 - 1990,
NATIONAL ELECTRICAL CODE.
2. IT SHALL BE THE RESPONSIBILITY OF THE OWNER / EMPLOYER TO PROVIDE
NECESSARY LOCKOUTS / TAGOUTS OF ENERGY SOURCES IN ACCORDANCE WITH ANSI
Z244, 1 - 1982, BEFORE ATTEMPTING REPAIRS.
3. ALL FIELD WIRING / ELECTRICAL RELATED LABOR SHALL BE PERFORMED BY
CERTIFIED ELECTRICIANS.
4. UNIT MUST BE PROPERLY GROUNDED IN ACCORDANCE TO NEC ARTICLE 250 (
GROUNDING ), AND APPLICABLE LOCAL CODES.
5.
11
DENOTES WIRE NUMBERS.
6. LABEL MARKERS SHALL BE PLACED ON ALL WIRES ( BOTH ENDS ), SWITCHES, RELAYS,
LAMPS, ETC., ALL WIRES TO BE INSTALLED WITH TERMINAL LUGS. ALL CONNECTIONS
SHALL BE WRENCH TIGHT.
7. THE FOLLOWING COLOR WIRES SHALL BE RESERVED.
GREEN: ALL EQUIPMENT GROUNDING CONDUCTORS.
WHITE: ALL NEUTRAL CONDUCTORS.
8. VERIFY PROPER MOTOR WIRING FOR PROPER VOLTAGE & ROTATION AT INITIAL
START-UP.
9. TRANSFORMER TERMINALS TO BE WIRED AND FUSED ACCORDING TO CUSTOMER'S
POWER SUPPLY. SEE TABLES ABOVE FOR FUSE SIZES, HEATER ELEMENT SIZES, &
TRANSFORMER WIRING.
10. ALL FUSES TO BE CLASS CC TIME DELAY TYPE.