Mohawk TR-110, Manual

Page: 11 / 76

MOHAWK MODEL TR-110 & TR-120
11
APPENDAGES
RECOMMENDATIONS BY THE INDIVIDUAL USER
OR USING ORIGINATION FOR IMPROVING THIS
PUBLICATION OR ANY ASPECT OF THE PRODUCT
ARE ENCOURAGED AND SHOULD BE FORWARDED
IN WRITING TO :
02+$:./,)76//& .
PRODUCT IMPROVEMENTS
P.
O.. BOX 110 AMSTERDAM, NY, 12010
THIS IS NOT A VEHICLE LIFTING PROCEDURE
MANUAL AND NO ATTEMPT IS MADE OR IMPLIED
HEREIN TO INSTRUCT THE USER IN LIFTING
METHODS PARTICULARLY TO THE INDIVIDUAL
APPLICATION OF THE EQUIPMENT DESCRIBED IN
THIS MANUAL. RATHER, THE CONTENTS OF THIS
MANUAL ARE INTENDED AS A
BASE LINE
FOR
OPERATION, MAINTENANCE, TROUBLE
SHOOTING, AND PARTS LISTING OF THE UNIT AS
IT STANDS ALONE AND AS IT IS INTENDED AND
ANTICIPATED TO BE USED IN CONJUNCTION WITH
OTHER EQUIPMENT.
PROPER APPLICATION OF THE EQUIPMENT
DESCRIBED HEREIN IS LIMITED TO THE
PARAMETERS DETAILED IN THE SPECIFICATIONS
AND THE USES SET FORTH IN THE DESCRIPTIVE
PASSAGES. ANY OTHER PROPOSED APPLICATION
OF THIS EQUIPMENT SHOULD BE DOCUMENTED
AND SUBMITTED IN WRITING TO :
02+$:./,)76//& .
FOR EXAMINATION. THE USER ASSUMES FULL
RESPONSIBILITY FOR ANY EQUIPMENT DAMAGE,
PERSONAL INJURY, OR ALTERATION OF THE
EQUIPMENT DESCRIBED IN THIS MANUAL OR ANY
SUBSEQUENT DAMAGES.
DO NOT WELD, APPLY HEAT, OR MODIFY THIS
EQUIPMENT IN ANY MANNER WITHOUT WRITTEN
AUTHORIZATION FROM :
02+$:./,)76//& .
CERTAIN ALLOY OR HEAT-TREATED
COMPONENTS MAY BE DISTORTED OR
WEAKENED, RESULTING IN AN UNSAFE
CONDITION.
02+$:. /,)76 //& .
IS NOT
RESPONSIBLE FOR DISTORTIONS WHICH
RESULT FROM WELDING ON THIS EQUIPMENT
AFTER MANUFACTURING IS COMPLETED.
UNAUTHORIZED WELDING, APPLICATION OF
HEAT, OR MODIFICATION OF THIS EQUIPMENT
VOIDS ANY AND / OR ALL APPLICABLE
WARRANTIES COVERING THIS EQUIPMENT.
ALL WARRANTIES APPLICABLE TO THIS
EQUIPMENT ARE CONTINGENT ON STRICT
ADHERENCE TO THE MAINTENANCE SCHEDULES
AND PROCEDURES IN THIS MANUAL.
KEEP ALL SHIELDS AND GUARDS IN PLACE.
INSURE
ALL SAFETY MECHANISMS ARE
OPERABLE. KEEP HANDS, FEET, AND CLOTHING
AWAY FROM POWER-DRIVEN AND MOVING
PARTS.
THIS EQUIPMENT MUST BE INSTALLED ON A
LEVEL CONCRETE FLOOR WITH A MINIMUM
THICKNESS OF EIGHT INCHES. THE CONCRETE
MUST BE AGED AT LEAST TWENTY EIGHT DAYS
PRIOR TO INSTALLATION AND HAVE A MINIMUM
TENSILE STRENGTH OF FOUR THOUSAND P.S.I..
WARNING
x
DO NOT INSTALL THIS UNIT IN A PIT OR
DEPRESSION DUE TO FIRE OR EXPLOSION RISK
IMPORTANT
DO NOT INSTALL THIS UNIT ON ANY ASPHALT
SURFACE.
DO NOT INSTALL THIS UNIT ON ANY SURFACE
OTHER THAN CONCRETE CONFORMING TO THE
MINIMUM SPECIFICATIONS STATED IN THE
GENERAL FLOOR REQUIREMENTS.
DO NOT INSTALL THIS UNIT ON EXPANSION
SEAMS OR ON CRACKED, DEFECTIVE CONCRETE.
CHECK WITH BUILDING ARCHITECT.
DO NOT INSTALL THIS UNIT ON A SECOND FLOOR
OR ANY GROUND FLOOR WITH A BASEMENT
BENEATH WITHOUT WRITTEN AUTHORIZATION
FROM THE BUILDING ARCHITECT.