Device Description MC-HPG-2x0
Display PLC
MC-HPG-2x0
Maintenance and repair
11 M
AINTENANCE AND REPAIR
Cleaning the screen
For trouble-free operation of the IR touch screen, clean the inner section of
the device front (front glass and IR frame) regularly ( Section 8.3).
Battery
The battery is used for backing up the real-time clock and the retain PLC
data. The battery should be changed every 3 years in order to prevent any
data loss.
Procedure for changing the battery
1. Switch on the device for at least 10 minutes
2. Then switch off the device and change the battery quickly
(the data is retained for at least 2 minutes)
The real-time clock must be reset after the battery is
changed.
Repairs
Repairs to the MC-HPG-2x0 should only be carried out by the manufacturer
or Moeller GmbH repair centers. In this case, please contact your local MC-
Control dealer or the Technical Support at Moeller GmbH. (manufacturer's
address
Section 14)
No liability is accepted for any modifications made to the device that are not
described in this document.
Transport
Only the original packaging must be used for transporting the device.
04/05 AWB2776-1574GB
©
by Moeller GmbH
39
Summary of Contents for MC-HPG-2x0 Series
Page 4: ...II ...
