Device Description MC-HPG-2x0
Display PLC
MC-HPG-2x0
Operation
6 O
PERATION
6.1 S
TARTUP BEHAVIOUR
After power on, the MC-HPG-2x0 carries out a system test. The PLC does
not switch to Run or Stop until no hardware errors have been found. The
system test includes the following:
•
Memory test
•
Flash disk test
Start messages
Version display of firmware:
Module name Version Size
VxWorks V 1.4.0005 974872
ethercfg.out V 1.1 2192
plcvxw.out 350055
cstitf.out V 1.2.0001 12082
cstcan.out V 2.3.0003 211286
cstepam.out V 1.1 5177
epam.out V 3.0.0168 824847
restore.out V 1.0.0001 5597
drvarti.out V 1.0.0015 99292
chttpd.out V 1.0.0007 17307
6.2 S
HUTDOWN BEHAVIOUR
Voltage dips of <= 10ms at 24V (
Section 12) are bridged by the power
supply unit. Longer voltage dips will cause the PLC to be reset
automatically.
Writing data to the CompactFlash™ during a power
supply failure will cause the data to be lost!
The EPAM visualization software therefore makes a
copy of the file in the directory C:\BACKUP before every
write operation. These files are restored if necessary at
the start.
04/05 AWB2776-1574GB
©
by Moeller GmbH
25
Summary of Contents for MC-HPG-2x0 Series
Page 4: ...II ...
