21
-
Timer may stop during
spinning step.
The automatic unbalanced load detection system might be
activated due to unbalanced distribution of the laundry in the
drum.
Machine does not continue to spinning step when the
laundry is not evenly distributed in the drum to prevent any
damage to the machine and to its surrounding environment.
Laundry should be
rearranged and re-spun.
Foam is overflowing from
the detergent drawer.
-
Too much detergent is used.
Mix 1 tablespoonful softener and ½ l water and pour into the main
wash compartment of the detergent drawer.
Laundry remains wet at
the end of the program
-
Excessive foam might have occurred and automatic foam
absorption system might have been activated due to too much
detergent usage.
Use recommended amount of detergent
If there is an error code on the digital display, the explanation is below:
Problem Code
Description
Solution
The washer fills too slowly.
Check if the tap is opened.
Check if the water pressure is too low.
Check if the inlet hose is blocked.
Water drainage too slow
Check if the drain pump is blocked.
Contact a technician if necessary.
Door is not locked properly
Close the door well again.
Check if the clothes is caught between the door
and seal.
Contact a technician if necessary.
Water is overflowing
Let the machine drain out the water
automatically until the water level is suitable for
wash procedure.
Contact a technician if necessary.
The electrical motor is breakdown
Please contact a technician.
