7
b)
Drainage
- If there is any leakage with the hose after the
connection, then repeat the steps to connect the
inlet hose.
- Do not bend the hose.
- Check for the inlet hose connection carefully
before using the washer every time.
Connect the drain hose
- The drain hose should be placed at a height of
65-100cm above the floor. Otherwise, it can
cause poor drainage.
- You can use the supplied drain hose support
bracket to loop the drain hose down into the
wall, standpipe or laundry tub.
- Make sure all the hose connections are
properly and tightly installed t.
The end of the drain hose cannot be submerged in
water to make the washer work properly.
4. Connecting with electricity
-
Make sure the voltage used is 220 volts and 50 Hz.
-
Insert the power cord to the socket that is connected to the
ground.
-
Avoid using extension cables, adapters and multiple sockets.
