17
disposal.
-
Remove the filter by turning it counter-clockwise and
pull out.
-
Rinse the filter by putting it under running water.
Make sure that the particles contained in the filter
have been lifted.
-
Replace the filter into its place by turning it clockwise
until it clicks into position.
To clean the
water entry
filter
Cleaning the
loading door
and the drum
-
Clean the water entry filter on a regular basis or if the
water filling time is too long.
-
Close the tap water and remove the water inlet hose
by turning it counter clockwise.
-
Clean the filter on the back of the washing machine
with a soft brush and rinse it with water.
-
Reinstall the water inlet hose as before.
-
Residues of softener, detergent and dirt may
accumulate in your machine in time and may cause
unpleasant odors and result of unclean laundry.
-
Run the program without any laundry in the machine.
Before starting the program, put max. 100 g of powder
anti-limescale into the main wash detergent
compartment. If the anti-limescale is in a tablet form,
put only one tablet into compartment main wash.
-
Dry the inside of the bellow with a clean piece of cloth
after the program has ended.
Note:
Repeat Drum Cleaning process every 2 months.
After every washing make sure that no
foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum
surface by using cleaning agents for stainless steel. Never use steel wool or wire wool.
