20
Program cannot be
started or selected.
-
Machine may have switched to self-protection mode due to an
infrastructure problem (such as line voltage, water pressure, etc.).
Reset your machine by pressing ’Start/pause’ button for 3 second.
Vibrate and eject noise
-
Machine might be standing unbalanced.
Adjust the feet to level the machine.
-
A hard substance might have entered into the pump filter.
Clean the pump filter.
-
Transportation safety bolts are not removed.
Remove the transportation safety bolts.
-
Laundry quantity in the machine might be too little.
Add more laundry to the machine.
-
Machine might be overloaded with laundry
Take out some of the laundry from the machine or distribute
the load.
by hand to balance it homogenously in the machine.
-
Machine might be leaning on a rigid item.
Make sure that the machine is not leaning on anything.
Machine stopped shortly
after the program started.
-
Machine might have stopped temporarily due to low voltage.
It will resume running when the voltage restores to the normal
level.
Program time does not
countdown. (On models
with display)
-
Timer may stop during water intake.
The timer
indicator will not countdown until the machine takes an
adequate amount of water. The machine will wait until there is a
sufficient amount of water to avoid poor washing results due to the
lack of water. Timer indicator will resume countdown after this.
-
Timer may stop during
heating step.
Timer indicator will not countdown until the machine reaches the
selected temperature .
Part 8:
Troubleshooting
