13
-
Temperature
Use this button to select the water temperature. Available selections (from cold to max
℃
) vary for
each cycle. The targeted setting will blink on the screen during the selection process.
-
Spin Speed
Use the button to select a spin speed. Available selections (from 0 to max rpm) vary for each
cycle. The targeted setting will blink on the screen during the selection process
.
-
Time Delay
This function makes it possible to delay the start time up to 24 hours of leaching. The setting
can be made at intervals of 30 minutes. Activating this function can be done by following these
steps:
1. Press the "+" or "-" on the "Time delay" function to set the delay time as you wish.
2. Press the "Start / Pause / Cancel" to activate this function.
-
Anti-bacterial
Press the button to get rid of the germ from the drum (other function buttons cannot be selected when this
function is selected). The “Anti-bacterial” function is not intended to clean clothes. Do not put any clothes
into the machine when using the function
.
-
Drum Clean
This cycle is specially set in this machine to clean the drum and tube. It applies 60/90°C high temperature
sterilization to make the drum and tube cleaner. With proper amount of chlorine bleaching, the barrel
cleaning effect will be better. When you run this program, we suggest not to put any clothes, you can use
this procedure regularly after usage.
-
Allergy Care
The procedure can rinse clothes to make it cleaner, preventing skin allergy because of detergent.
-
Power-off memory
In case of power failure during the cycle, the settings will be saved, and operation will resume when
the power is restored
.
-
Child lock
Pressing the “Temperature” and “Spin” button together for 3 seconds can activate or cancel the “Child
lock” feature to avoid miss-operations. When the feature is activated, all buttons cannot be set until
the operation is over or it is canceled
.
