16
properly.
-
If your detergent drawer is the one indicated in
the following figure:
Note
: Lift the rear part of the siphon to remove it as
illustrated. After performing the above mentioned
cleaning procedures, replace the siphon back to its
seating and push its front section downwards to make
sure that the locking tab engages.
Empty the water
in emergency
If the washing machine cannot work normally or there
is a power outage when the washing machine is
working and there is the rest of the water in the tube,
then to empty the remaining water follow the
procedures below:
-
Turn off the water faucet and turn the Cycle button
to OFF position.
-
Wait until the water in the washing machine to cool
down. Put a water container.
-
Open the filter cover.
-
Rotate the dryer hose cover.
-
Pull the dryer hose water.
-
Remove the water drying hose cover then put the
hose to the container and let the water flow naturally.
Cleaning the
Pump Filter
-
Clean the pump filter regularly. Make sure the
washing machine is empty and there is no water in
the tube. Ensure that electrical current has been
disconnected.
-
To clean it, place the container or cloth under a
cover or filters to accommodate the remaining water
