Mode Lighting ColourStyle, User Manual

Page: 13 / 15

U Usseerr G Guuiid dee --EEnng giinneeeerrss M Meennuu
22
22
Mode Lighting - ColourStyle User Guide
EEnntteerriinng g EEnng giinneeeerrss M Mo od dee ffo orr d deetta aiilleed d C Co onnffiig guurra attiio onn
To enter Engineer’s Mode from the M Maaiinn M Meennuu press the fourth button (Sound-to-
Light) and the select button alternately, twice (i.e. press left, right, left, right).
C Co onnffiig guurree A Accttiio onn M Meennuu
The C Coonnffiigguurraattiioonn menu is used to set up all functions of the DMX Generator:
1 . ) Sound-to-Light
3.) Sound-to-Light
2.) Select
4.) Select
U Usseerr G Guuiid dee -- A Acccceessiinng g Q Quuiicckk SSeettuup p
C Co onnffiig guurree M Meennuu -- C Co onnttiinnuueed d
Clock: Sets the built-in real time clock, and geographical location.
Timed Events: Configures how the real-time-clock can be used to make scenes or
sequences happen at pre-programmed times or dates.
Network Setup: Configures the TCP/IP settings of the DMX Generator.
DMX Setup: Configures the number of channels
transmitted, and the timing
parameters of the DMX data, such as
the break, mark-after-break and
packet refresh timing.
Rear Terminals Setup: Selects the function of the configurable terminals on the rear
of the product, whether they are to be analogue 0-10v outputs, or
switch inputs.
Sound-to-Light Setup: Enable the Sound-to-Light
and view the “Beat Monitor”
Display Setup: Choose the backlight colour and
contrast of the display
Language: Select the display language
Clear Lighting Setup: Return to a blank system, so that new settings can be created.
23
23
Mode Lighting - ColourStyle User Guide
Fixtures; The DMX fittings connected to the ColourStyle
Scenes; Groups of static levels for channels of DMX
Sequences; The recall of scenes automatically over time
Triggers; Sets up the way in which the buttons or inputs
cause scenes or sequences to be recalled.
The scroll-bar posi-
tion shows which
section of the menu
is currently on view.
Use the scroll wheel
to move up and
down between
menu items and to
bring new items
into view.