Modbus IOG700AM-0xCR1, User Manual

Page: 110 / 395

Modbus Cellular Gateway
Index skipping is used to reserve slots for new function insertion, when required.
110
setting under System )
Then check Enable box to enable this rule.
When “ UDP ” is selected
It means the option “Protocol” of packet filter rule is UDP.
Public Port selected a predefined port from Well ‐ known Service , and Private Port
is the same with Public Port number.
Public Port is selected Single Por t and specify a port number, and Private Port can
be set a Single Port number.
Public Port is selected Port Range and specify a port range, and Private Port can
be selected Single Port or Port Range .
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )
Then check Enable box to enable this rule.
When “ TCP & UDP ” is selected
It means the option “Protocol” of packet filter rule is TCP and UDP.
Public Port selected a predefined port from Well ‐ known Service , and Private Port
i s the same with Public Port number.
Public Port is selected Single Port and specify a port number, and Private Port can
be set a Single Port number.
Public Port is selected Port Range and specify a port range, and Private Port can
be selected Single Port or Port Range .
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )
Then check Enable box to enable this rule.
When “ GRE ” is selected
It means the option “Protocol” of packet filter rule is GRE.
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )
Then check Enable box to enable this rule.
When “ ESP ” is selected
It means the option “Protocol” of packet filter rule is ESP.
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )
Then check Enable box to enable this rule.
Click the Save button to save the settings.
When “ SCTP ” is selected
It means the option “Protocol” of packet filter rule is SCTP.
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )
Then check Enable box to enable this rule.
When “ User ‐ defined ” is selected
It means the option “Protocol” of packet filter rule is User ‐ defined.
For Protocol Number , enter a port number.
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )