Modbus IOG700AM-0xCR1, User Manual

Page: 203 / 395

Modbus Cellular Gateway
Index skipping is used to reserve slots for new function insertion, when required.
203
It means the option QoS Direction of rule ‐ based QoS Rule is inbound. Inbound
means the Group option is a destination group.
When Both is selected
It means the option QoS Direction of rule ‐ based QoS Rule is both.
Time Schedule (A Must filled setting)
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )
Enabling the rule
Click Enable box to activate this rule.
Click the Save button to save the settings
When Priority Queues is selected
It means the option Resource of rule ‐ based QoS Rule is priority queues.
In Control Function when Set Priority is selected
It means the option Control Function of rule ‐ based QoS Rule is set priority. You
must fill the priority queue number in the textbox.
QoS Direction (A Must filled setting)
When Outbound is selected
It means the option QoS Direction of rule ‐ based QoS Rule is outbound. Outbound
means the Group option is a source group.
When Inbound is selected
It means the option QoS Direction of rule ‐ based QoS Rule is inbound. Inbound
means the Group option is a destination group.
When Both is selected
It means the option QoS Direction of rule ‐ based QoS Rule is both.
Time Schedule (A Must filled setting)
Apply Time Schedule to this rule, otherwise leave it as Always . ( refer to Scheduling
setting under System )
Enabling the rule
Click Enable box to activate this rule.
Click the Save button to save the settings
When DiffServ Code Points is selected
It means the option Resource of rule ‐ based QoS Rule is DiffServ Code Points .
In Control Function when DSCP Marking is selected
It means the option Control Function of rule ‐ based QoS Rule is DSCP marking. You
must select one from the list. DSCP Marking will mark with Code Point in Packet.
QoS Direction (A Must filled setting)
When Outbound is selected
It means the option QoS Direction of rule ‐ based QoS Rule is outbound. Outbound
means the Group option is a source group.
When Inbound is selected
It means the option QoS Direction of rule ‐ based QoS Rule is inbound. Inbound
means the Group option is a destination group.
When Both is selected
It means the option QoS Direction of rule ‐ based QoS Rule is both.
Time Schedule (A Must filled setting)