Mocon AMETEK Dansensor Lippke VC1400, User Manual

Page: 81 / 104

Dansensor
®
Lippke VC1400 EN User Guide 79
P/N 390262-B
02/2022
6. The Vacuum Test screen shows the currently set test vacuum.

To set another test pressure, press Test vacuum ...

...then enter the required test vacuum (ex. 600 mbar) and press .
7. Press the button to start the test.
8. The test starts by evacuating the system until the set vacuum is reached.

Then the valves are closed and in the following period the pressure should be observed
until it can be decided whether the system is tight or not.

The test can then be stopped by pressing the button.
9. When a test fails, it will be necessary to investigate where there are leaks in the system and
have these repaired.
NOTE! We recommend to perform additional tests afterwards.