manualshive.com logo in svg

Mocon AMETEK Dansensor Lippke VC1400, User Manual

Share
Download
Mocon AMETEK Dansensor Lippke VC1400 User Manual Download Page 31

Dansensor

®

 

Lippke 

VC1400

EN

User Guide

29

P/N 390262-B

02/2022

4. Operating

Basics

CAUTION! If the device has been stored in a cold location and then moved to a 
warmer location then at least one hour of acclimatization is required before 
switching on the unit. 

If operated in a cold and high humidity environment it is advisable to let the device 
heat up for 30 minutes after is has been switched on.

NOTE! Up to 10 minutes of heating time after power on is required before 
measurements can be performed.

Switching on/off

1. Use the “ON/OFF” button on the back of the device to switch the device on and off.
2. When the device is switched on, the display will show the start-up screen, indicating the 

device model and the currently installed firmware version 

.

3. When the device is ready and if no login is required, the display will show the 

Main 

Menu

:

Current user is the default 

Operator

.

Summary of Contents for AMETEK Dansensor Lippke VC1400









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands