Mocon AMETEK Dansensor Lippke VC1400, User Manual

Page: 30 / 104

28 User Guide EN Dansensor
®
Lippke VC1400
P/N 390262-B
02/2022
Items 8 to 10 only apply to “External Vacuum” models:
8. The noise filter

is already fitted. Check that it is sufficiently tightened.
9. Connect the Ø6/4 mm vacuum hose

from the external vacuum system or from the
“VACUUM OUT” connector on the Dansensor® Lippke PU1400 pump unit to the
“VACUUM IN” inlet connector.
NOTE! If you are using the pump unit, the vacuum hose can be cut to a length of
approx. 30 cm.
CAUTION! When connecting the hose, make sure that it can not be squeezed or
blocked in any way.
10. Connect the pump unit control cable

to the “I/O CONTROL” connector.
NOTE! Check to ensure that all hoses are firmly and tightly connected. Please use
the union nuts provided with the system. This will help ensure that all the
connections are safe and leak free - see
"Correct use of hose connectors" on page 25 .