Mocon AMETEK Dansensor Lippke VC1400, User Manual

Page: 67 / 104

Dansensor
®
Lippke VC1400 EN User Guide 65
P/N 390262-B
02/2022
Access levels
The various access levels and the associated rights are described below:
NOTE! A higher level of access always has all rights from lower access levels.
Standard Test

Operator
Basic user.

Can only perform tests on workflows/test definitions marked as
Standard Test .

If Use State Mark is enabled in Settings -> Device the access
is limited to Standard Test test definitions/workflows marked with

State = Current .

Cannot change any settings.
Operator Normal user.

Can perform tests using all test definitions/workflows with

State = Current .

Cannot change any settings.
Supervisor Daily administrator of test definitions/workflows and standard users.

Has access to all test definitions/workflows.

Can create test definitions/workflows and edit custom fields.

Can create Standard Test Operator and Operator users, but not
other Supervisor users.

Can access the System Test and Vacuum Test functions from the
Service -> Test & Adjustment menu.

Can export measurement logs and error/event logs.

Cannot change settings in the Settings menu.
Administrator Device administrator.

Can change settings in the Settings menu (except for the
Service menu).

Can create Supervisor users and other Administrator users.

Can reset PIN-codes.

Can remove access to Service login.

Can export and import all data.
Service Service Technician.

Can access all settings in the Settings -> Service menu.

Can access all functions in the Service -> Test & Adjustment
menu.