Mocon AMETEK Dansensor Lippke VC1400, User Manual

Page: 101 / 104

Dansensor
®
Lippke VC1400 EN User Guide 99
P/N 390262-B
02/2022
Operating/storing temperatures

The device is designed to be operated and stored in the temperatures ranges as specified in
"Basic specifications" on page 92 .

The device can be damaged if stored or operated outside of these temperature ranges.

Avoid exposing the device to dramatic changes in temperature or humidity.
NOTE! If the device has been stored in a cold location and then moved to a warmer
location then at least one hour of acclimatization is required before switching on
the unit.

If operated in a cold and high humidity environment it is advisable to let the device
heat up for 30 minutes after is has been switched on.
NOTE! The Lippke must be placed in a temperature controlled environment in order
to perform within specifications. Temperature and pressure in a (closed) test
volume are proportional i.e. changes in ambient temperature will have an impact
on the pressure during a leak test.


Toxic and Hazardous Substances or Elements
(For China RoHS compliance)
See table on the next page.