Mocom Tethys H10, Operator'S Manual, Page: 80 / 86

80 OPERATOR'S MANUAL EN
ERRORS (CATEGORY S)
CODE MESSAGE ON THE
DISPLAY
DESCRIPTION EXIT
S001 FLASH NOT ACCESSIBLE Flash memory not accessible 2
S002 FLASH FULL Flash memory full. 2
S003
SD CARD NOT
ACCESSIBLE Micro SD card not accessible for data
storage in start-up phase.
2
S004 SD CARD FULL Micro SD Card full 2
S005 USB STICK ERROR
USB stick not accessible (interruption
of communication after download
started successfully).
2
S006
USB STICK NOT
ACCESSIBLE USB Stick not accessible (before
download start)
2
S007 USB STICK FULL USB stick full 2
S008
SD CARD NOT
ACCESSIBLE Micro SD not accessible during data
storage phase
2
S018
IMPOSSIBLE TO OPEN
CRC FILE CRC file inside SD card cannot be
opened
2
S020 RUN BACKUP
Cycle report to be downloaded
recommended limit has been reached.
2
S021 OVERWRITE DATA
Cycle report to be downloaded limit in
case of SD Card malfunction has been
reached.
2
S030 SYSTEM ERROR Malfunction in software running.
2 (out of
cycle)
3 (in cycle)
S031 SYSTEM ERROR Malfunction in software running.
2 (out of
cycle)
3 (in cycle)
S032 SYSTEM ERROR Malfunction in software running.
2 (out of
cycle)
3 (in cycle)
S033 SYSTEM ERROR Malfunction in software running
2 (out of
cycle)
3 (in cycle)
S100 INCONSISTENT STATUS
Software problem in management of
the correct sequence of events
3
1 = OK (warning) + chamber emptying
2 = OK (warning)
3 = cycle interr ok + door reset 3