Mocom Tethys H10, Operator'S Manual, Page: 78 / 86

78 OPERATOR'S MANUAL EN
ERRORS (CATEGORY E)
CODE MESSAGE ON THE
DISPLAY
DESCRIPTION EXIT
E000 BLACKOUT Black-Out. 3
E001 OVERVOLTAGE Overvoltage. 3
E004
NETWORK FREQUENCY
ERROR
Network frequency reading problem 3
E011 LID OPEN! Attempt to start a cycle with lid open. 2
E552 WAIT!
Attempt to start a cycle with chamber
drainage in progress after full chamber
alarm
2
E070 MIN SALT LEVEL
Signal of salt float minimum level. It
locks the machine after a number of
cycles depending on set water
hardness
2
E071
START CYCLE WITH
REGENERATION
Signal to start a cycle with resin
regeneration (Resin regeneration,
Disinf. 90°C, Washing, D1 Custom, D2
Custom and W1 Custom)
2
E800 MIN DETERGENT LEVEL
Detergent fluid level under the
minimum level
2
E900 NO SET PW US
Power read by US board memory other
than requested value
3
E901
POWER ABOVE / UNDER
THRESHOLD Power detected by US board other than
set value
3
E957
UPDATING US IN
PROGRESS
Ultrasound update in progress 2
E999 MANUAL INTERRUPTION Manually interrupting the cycle 3
1 = OK (warning) + chamber emptying
2 = OK (warning)
3 = cycle interr ok + door reset 3