8
OPERATOR'S MANUAL
EN
PRODUCT HANDLING
Thermo-disinfector removal from package and lifting operations must be carried out by two
persons. Handle the device with a truck or suitable means.
WARNING
WE RECOMMEND TO TRANSPORT AND STORE THE DEVICE AT A
TEMPERATURE NOT BELOW 5°C. EXTENDED EXPOSURE TO LOW
TEMPERATURES MAY DAMAGE THE PRODUCT.
NOTE
KEEP THE ORIGINAL PACKAGE AND USE IT WHENEVER THE DEVICE
IS TO BE TRANSPORTED. THE USE OF A DIFFERENT PACKAGE MIGHT
DAMAGE THE PRODUCT DURING SHIPMENT.
EMPTYING OF
DETERGENT
RESERVOIR AND
WATER CIRCUIT
Before any transport following the first installation, it is necessary to empty the detergent
reservoir.
WARNING
FOR FURTHER INFORMATION ABOUT RESERVOIR EMPTYING
PROCEDURE, PLEASE CONTACT THE TECHNICAL SERVICE
DEPARTMENT (SEE APPENDIX).
If salt is present inside resin regeneration reservoir, some salt solution could leak out of
thermo-disinfector water filling pipe.
Water evaporation could result in the creation of salt crystals around water filling union. To
eliminate salt deposits, rinse with water and dry.