89
/140
Network And Power Connection
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Connecting the Patch Cable to an MX-Overvoltage-Protection-Box, an MX-NPA-Box
or a Standard Network Outlet
To establish the network connection of the camera using an
MX-Overvoltage-Protection-Box or an MX-NPA-Box, remove
the blue bayonet catch and the blue sealing plug from the
right-hand side of the box. Insert the MOBOTIX patch cable
into the box and fasten the cable using the blue bayonet catch.
For additional‚ information on how to install an
MX-Overvoltage-Protection-Box
or an
MX-NPA-Box
, open
the
Products > Accessories > Interface Boxes
section on
www.mobotix.com
.
When using a standard network outlet (only for indoor installations), insert the MOBOTIX
patch cable of the D25M directly into the network outlet.
2.9.3 Power Supply Using A Switch
1. Connect the factory pre-installed cable of the camera to the
camera
connector of
the PoE adapter.
2. Connect the
LAN/Power
connector of the PoE adapter to the Ethernet connector
of the switch/router or the Ethernet port.
3. Plug the RJ45 connector of the power supply unit into the
PC/Power
connector
of the PoE adapter.
Patch cable
IP addresses in the
diagram are shown
only as an example
Switch/router
PoE adapter
(MX-NPA-PoE)
Power supply
LAN/www
PC
(10.8.0.11/255.0.0.0)
Camera
(10.8.0.99)
LAN/Power
PC/Power
Camera
RJ45
RJ45
RJ45
