Mobotix D25M Manual Download Page 74

Page: 74 / 140

/140

D25M Camera Manual: Installation

© MOBOTIX AG • Security-Vision-Systems • Made in Germany

www.mobotix.com • [email protected]

2.5.2 Procedure

•

Remove the camera outer shell:

Remove all four Allen

screws using the supplied Allen wrench and lift off the
outer shell.

•

Remove the standard dome:

Unscrew the dome from

the housing

(counter-clockwise)

. Package and store the

standard dome for possible use at a later time.

•

Aim and adjust the lens:

When mounting the camera for the first time, please

proceed to

Section 3.3.1, «Aiming and Adjusting The Lens».

•

Mount the reinforced dome of

the Vandalism Set. Tighten

in a clockwise direction

using a soft cotton cloth. If

necessary, clean the dome with a cotton cloth before
installing it.

Summary of Contents for D25M













































































































































Search results

Summary of Contents for D25M

Reviews:

Related manuals for D25M

Brands by name

Popular brands

Mobotix D25M, Manual

Search results

Summary of Contents for D25M

Reviews:

Related manuals for D25M

Brands by name

Popular brands