64
/140
D25M Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Notes
Use the fold-out template included at the end of the printed manual (valid for both
0° and 10° On-Wall Sets).
Make sure that the drilling template is not scaled or adjusted to the paper size when
printing the PDF file (enlarged or reduced).
The maximum torque for all screws is 1 to 1.2 Nm.
Required Parts
Please first check that all components supplied with the On-Wall Set are present in the
original packaging. The following additional items are required for installation:
• Suitable materials for ceiling/wall installation:
4 screws incl. screw anchors and
washers
(e.g. from the original camera packaging)
•
Screwdriver
•
Power drill
for screw anchor holes needed for ceiling/wall mounting
• MOBOTIX
drilling templates
(at the end of this manual)
•
Scissors
to cut out the template
•
Pen
to mark the drill holes
• Materials and tools needed to connect the pre-installed MOBOTIX network cable in
the camera with the on-site network cable
