VAP Installation and Provisioning
LTE 700 MHz MobileAccessVE Instant Coverage Solution User Manual
40
5.3.2
Lowered Ceiling Installation
To Install VAP in Lowered Ceiling
1.
Loosely
assemble the two brackets (Ceiling and Locke) using the (3) Flat Head Screws.
(Note: The assembly will be secured at a later stage.)
2. Assemble the Track Light Clip to the Ceiling Bracket (top side) using the provided washer
and bolt.
3. Hook the assembly onto the VAP rear panel grid and fit to the bottom of VAP.
4. Secure the assembled brackets to the bottom of the VAP using the (4) Self Screws.
5. Adjust the bracket assembly to firmly fit the VAP and tighten the (3) screws securing the
assembly.
6. Mount the VAP on the lowered ceiling as follows:
Enlarge large flanges over opposite sides of T-bar.
Note: Apply slight pressure as Twist
Clip is made of spring steel.
