VCU Monitoring and Configuration
LTE 700 MHz MobileAccessVE Instant Coverage Solution User Manual
60
The following information is displayed:
Field
Description
Name
User defined name for system element (up to 17 characters)
Serial Number
Factory set ID number
Product Revision
Revision number of VCU/VAP
SW Active Version
Version of the SW currently being used to manage and monitor
the system
SW Inactive Version
Version of other system SW version not in use
Identify Button
Enabling this option enables finding the physical location of the
selected element (See section 10.1). When this option is set to
ON, the LEDs on the corresponding VAP/VCU flickers.
Reset Button
SW reset of the unit
7.2
Viewing VCU Alarms
The alarms displayed in the Alarms tab correspond to the VCU (Master/Slave) selected in the
topology tree. When a VCU element is selected in the topology tree, the Alarm tab displays the
main alarms in the unit.
To View VCU Alarms
In the Topology Tree select the
Control Unit
(VCU) then click the
Config(uration)
tab in the
menu bar located at the top of the window. Refer to the
VCU Alarms and Mask
sub tab.
If one or more alarms occur, the corresponding Status indicator will be illuminated in RED. If the
VCU is OK and no fault occurs, the
Overall Status
indicator will illuminate GREEN.
