Mobeye ThermoGuard TwinLog CML2255, Portal User Manual

Page: 22 / 28

21
The timing of the test message can be programmed. Since new settings (options) will
be synchronised after the test message, setting a specific time of the test message can
help the process of remote programming. Example: if you force a daily test message at
17.30 hrs, you can prepare new settings and be sure they are loaded into the device
before the evening.
The interval between the test messages can be set between 0 days (no test message)
and 30 days. The default test interval is set to 7 (weekly test message).
5.21 LOG INTERVAL
The logging interval is the interval in which the measured values are logged (with a
timestamp). The data are stored in the system until the next data transfer. The logging
interval can be set between 0 and 9999 minutes. The default log interval is set at 60
(minutes).
5.22 TRANSFER INTERVAL
When transferring data, the recorded values are sent to the Portal. The transmission
interval can be set between 1 and 999 hours. The standard transmission interval is set
to 12 (hours).