Mobeye ThermoGuard TwinLog CML2255, Portal User Manual

Page: 20 / 28

19
5.14 ALARM INDICATION
The CML2255 has an internal piezo siren, which sounds at an alarm and keeps
sounding as long as the unit is in alarm status. The siren can be interrupted by briefly
pressing the on/off button. The alarm indication can be disabled, so it won’t sound at all
(OFF). As default this indica
tion is set to ‘ON’.
5.15 PULSE TIME OUTPUT
The pulse time or switch time of the output is adjustable between 1 and 9999 seconds.
The pulse time indicates how long the output remains switched after a telephone
number sends CODE O1ON (e.g. 1111 O1ON), before it automatically switches back
again. If the pulse time is set to 0 seconds, the output will not automatically switch back.
It may be switched back by SMS command CODE O1OFF. By default, the pulse time is
set to "0" second.
5.16 OUTPUT BEHAVIOUR
The output can switch automatically when the unit is powered externally, or after an
alarm (ALARM). The output remains on as long as the unit remains in alarm status. For
controlling the output via SMS command the output behaviour should be ‘RC’ (remote
control). The pulse time defines the duration of switching (see 5.15). By default, this
value ALARM.
5.17 AUTOMATIC ARMING / DISARMING
The Mobeye CML2255 only works if the unit is armed, which is done via the on/off
button. It is possible to automatically arm and disarm the unit, based on an arming
and/or disarming time scheme. Two schemes can be entered, which can be assigned
to the days in the week (e.g. to have a different weekend scheme).
As default the automatic (dis) arming times are valid for all days. It is possible to assign
them to only a few days in the week. In this way it is possible to have two different
schemes, which are valid on different days.