Mobeye ThermoGuard TwinLog CML2255, Portal User Manual

Page: 19 / 28

18
5.10 POWER FAILURE DELAY TIME
If the Mobeye CML2255 is powered externally and the power fails it can notify the
contact person(s). The power failure delay time defines the time between the initial
power failure and the alarm notification. If the power is restored within the delay time,
no alarm is sent. The time can be set between 0 and 999 minutes. As default, the delay
time is set to 0.
5.11 POWER FAILURE MESSAGE
If the Mobeye CML2255 is powered externally and the power fails it sends a message
to the portal and calls the programmed telephone numbers, following the on/off settings
of ‘CALL’. Power restore results in a message to the portal. This is setting ‘ALARM’.
This can be set to ‘ALERT’ or ‘OFF’. If the setting is ‘ALERT’ the power failure message
and restore will be sent to the portal
. The setting ‘OFF’ means that no power failure
message is sent. The default setting for t
he ‘power failure message’ is set to “ALARM”.
5.12 UNIT OF TEMPERATURE
The temperature can be programmed and displayed in degrees Celsius (C) or
Fahrenheit (F). If the unit was set to F, the temperature limits can be set between
-30 °F and 158 °F. As default this unit is set to C.
5.13 TEMPERATURE CALIBRATION
The temperature sensor is digital and has a high quality. For special applications it is
possible to calibrate the sensor and program a correction. The adjusted temperature
will be used in the measurement and reports. For each temperature sensor a calibration
can be entered.
Example: the Mobeye CML2255 measures 13 °C. Actual ambient temperature: 13,5 °C.
To adjust this difference, +0,5 degrees shall be programmed.