Mobeye ThermoGuard CM2200, User Manual

Page: 9 / 32

8
2.5 PROGRAM AT LEAST ONE TELEPHONE NUMBER
The Mobeye ThermoGuard is able to send messages up to 5 telephone numbers. The
first telephone number (TEL1) belongs to the administrator. Technical messages (such
as
battery low ) are sent to the administrator only. Without the administrators
’ phone
number, the Mobeye ThermoGuard cannot function.
When the ThermoGuard is in initial (factory) status and the batteries are inserted (so the
LED is flashing), the administrators
’ number is programmed by calling the telephone
number of the Mobeye ThermoGuard using the
administrators’ phone. The unit will
recognize this number and store it as administrator (TEL1). The administrator will
receive a confirmation SMS text message including the security code. This code is
needed to program the other settings in the unit.
NB: For this way of programming the number recognition in the administra
tor’s phone
mus
t be ‘on’. To program or change the administrators’ number by SMS command,
please refer to 4.2.
2.6 PROGRAM THRESHOLD VALUES FOR THE INPUTS
A separate high and/or low temperature limit can be set for the temperature sensor. Both
limits can be set between -35
and +70 ºC. Negative values are entered by placing a “-”
in front of the value.
To enter a temperature limit, be sure the Mobeye ThermoGuard is in program mode.
Send an SMS text message to the unit with following content:
SMS command lower limit: 1111 LTL:
example: 1111 LTL:-5
SMS command upper limit: 1111 HTL:
example: 1111 HTL:25
Please mind the space behind 1111.