22
As default the automatic (dis) arming times are valid for all days. It is possible to assign
them to a few days in the week. In this way it is possible to have two different schemes,
which are valid on different days.
To assign TIMEARM and/or TIMEDISARM to weekdays:
SMS command to assign ‘scheme 1’:
DAYS1:
SMS command to assign ‘scheme 2’:
DAYS2:
As value the weekdays can be entered. Monday is 1, Tuesday is 2, etc. If the scheme is
valid for several days, the days can be entered in one command (e.g. 12345 means
Monday till Friday).
example:
1111 DAYS1:12345
example:
1111 DAYS2:67
5.17 BUTTONLOCK
It can be useful to lock the on/off button to prevent the unit from being switched off
unintentionally.
In the ‘buttonlock’ mode the button is still available to get in the program
mode. As default the buttonlock is OFF (so, the button can be used). To disable the
button, the buttonlock needs to be switched to ON.
SMS command buttonlock:
BUTTTONLOCK:
example:
1111 BUTTONLOCK:ON
5.18 TEST MESSAGE
The Mobeye ThermoGuard can send regular test SMS messages (
keep alive
) to the first
phone number (TEL1), to ensure the proper functioning of the unit. The test message
contains the actual temperature. The test message function is only active if the unit is
armed.
The timing of the test message is determined by the time of programming. The test time
can also be programmed.
The interval between the test messages can be set between 0 days (no test message)
and 30 days. The default test interval is set to 0 (no test message).
SMS command interval test message:
TEST:
example: 1111 TEST:21
Summary of Contents for ThermoGuard CM2200
Page 1: ...USER MANUAL Mobeye ThermoGuard CM2200 SW version 4 n ...
Page 2: ......
Page 31: ...30 ...
Page 32: ......
