Mobeye ThermoGuard CM2200, User Manual

Page: 14 / 32

13
4.2 THE (SECURITY) CODE
For configuration activities the (security) code of the Mobeye ThermoGuard must be
used. The initial (security) code is
‘1111’. You can change the (security) code to your
own code. See section 4.4.
4.3 PROGRAMMING THE SETTINGS BY SMS
To program the settings by SMS text message:
1. Make sure the ThermoGuard is in program mode (please refer to 4.1).
2. Send an SMS text message with the (security) code and the command.
3. The green LED blinks 3 times to indicate the successful configuration. In case of an
incorrect command, the red LED flashes 5 times.
SMS messages have the following content:
CODE COMMAND:OPTION
- Do not forget the space character between (security) code and command.
- The commands are case insensitive.
- Several commands may be combined in one SMS message (with a maximum of
160 characters) by placing a # between the commands.
CODE COMMAND:OPTION#COMMAND:OPTION#COMMAND:OPTION
See section 4.4 for a full list of SMS commands.