Mobeye ThermoGuard CM2200, User Manual

Page: 7 / 32

6
2. GETTING STARTED
To get started with the Mobeye ThermoGuard, at least the following steps need to be
taken in the following order:
1. Insert a SIM card
2. Connect the temperature sensor
3. Insert the batteries
4. Enter the program mode
5. Program at least one telephone number
6. Enter a value for the temperature limits
7. Arming/disarming the system
These steps are further explained in this chapter. After these steps the module will be
operational.
2.1 INSERT A SIM CARD
Open the enclosure by removing the 4 screws and insert a SIM card into the module.
Push the black cover slightly outward to open the holder. Before installing the SIM card
should have PIN code "0000", or PIN code removed.
(A PIN code can be changed or removed by putting the SIM card in to any mobile phone and entering
the 'security' menu).
NB: Make sure the SIM card is inserted before the batteries are inserted. If you replace a
SIM card, first remove the batteries (and remove any other external power supply). The
settings are stored in the device memory.