© MOBATIME
8/40
BE-801259.05-HN 60&61master clock
2.3.4 Terminal description
Fuse
MST fuse T200 mA / 250 V or T315 mA / 250 V (for power supply
115 VAC / 60 Hz)
L N PE
mains power input 230 VAC / 50 Hz or 115 VAC / 60Hz respectively
CH1
connection switched circuits, max. 250 V, 6 A, 1500 VA, ith
possibility of programming or manual switching
O1
– O4
universal switching outputs type OC (HN 60m / 61m only)
I1 - I2
universal switching inputs (HN 60m / 61m only)
+ 24 -
DC output for powering other external devices (eg school bells), can
also be used as a 24 VDC power supply
+ ACCU -
14 V output for powering external devices or charging of external
battery
L1
slave line connection terminals
+ DCF IN -
DCF input for HN 60/ HN 60i / HN 60a / HN 60m
+ DCF OUT -
synthetic DCF output for HN 61 / HN 61i / HN 61a / HN 61m
GPS SMA connector
for GPS antenna, for HN 61/ HN 61i / HN 61a / HN 61m
USB
USB for connecting flash memory with switching programs
LED CH1
channel status indication
LED DCF
DCF reception indication
RS485 TRE
activation of RS485 bus terminating resistor (optional)
RS485
communication bus RS485 (optional)
AUDIO
line audio output, 3.5 mm jack connector (HN 60a / 61a)
