1
Manual
Introduction
The Atomic Digital Clock with Weather Forecast offers radio-controlled time, pressure history,
weather forecast, and indoor and outdoor temperature on one easy to read display.
512A-811 and 512B-811
Atomic Digital Clock with Weather Forecast
Time
Alarm icon
Outdoor Temperature
WWVB Snooze icon
Reception
Barometric Date Indoor
Pressure Temperature
History
Forecast icon
2
FEATURES:
x
Four digit time display (3 inches high)
x
Atomic time and date with manual set option
x
Automatically updates for Daylight Saving Time (on/off option)
x
Choose from 5 languages (English, German, French, Dutch, Spanish).
x
Choose from 4 Time Zones (Eastern, Central, Mountain, Pacific).
x
12-hour or 24-hour selectable time
x
18-hour pressure history graph.
x
Forecast icons: sunny, partly cloudy, cloudy, rainy and stormy.
x
Daily Alarm
x
Perpetual calendar.
x
Indoor temperature (°F or °C)
x
Outdoor temperature (°F or °C)
x
Can read up to 3 outdoor transmitters
x
Wall hanging or free standing
x
Low battery indicator for receiver and transmitter
x
100 foot wireless transmission range (open air)
SET UP:
x
Remove the screws and the battery cover from the back of the transmitter with a small
screwdriver.
(see install batteries in transmitter).
x
Set the transmitter to Channel 1.
x
NOTE
: if you have additional transmitters set them to channel 2 and channel 3 respectively.
x
Insert fresh alkaline batteries into the transmitter, observing the correct polarity (see marking
inside battery compartment). Keep the transmitter 5-10 feet from the atomic clock.
x
Select Fahrenheit or Celsius for the transmitter display.
x
Insert batteries into the atomic clock, observing the correct polarity
(see install batteries
into the atomic clock).
Once the batteries are in place, all segments of the LCD will light up
briefly. The time will be displayed, as 12:00 and the outdoor temperature area will flash,
searching for the temperature transmitter(s).
x
After the batteries are inserted in the clock, press the TX button on the back of the
transmitter to send a signal to the clock.
x
Within 3 minutes the outdoor temperature should be displayed on the atomic clock. If
temperature does not show after 3 minutes, remove the batteries from both units for 60
seconds and start again from the beginning.
