© MOBATIME
14/40
BE-801259.05-HN 60&61master clock
3.2 The LINE screen
This screen shows the operation state of the slave line. This is displayed when push gradually
the button from the MASTER screen.
Button function in Line screen mode:
start / stop the slave line
slave line time setting (pulse lines only)
enter the slave line menu (the adjustment is described in chap. 7)
slave line status can be:
stop
line is stopped, it is possible to set the line time
running
line normal operation
fast fwd
accelerated catch up cycle
waiting
line in waiting mode; time necessary to correct the time of slave
clocks is shorter than the time necessary for accelerated catch-up
cycle
overload
line is overloaded or short circuit on line
12pos + stop
accelerated catch-up cycle with automatic stop on 12:00
Note:
MOBALine
time on the line is displayed only,
can’t be set; only the mode of
minute hand of analog clock movement mode can be set
3.2.1 Setting the time of slave line
Set the slave pulse line time in stop mode. Set the same time on all slave clocks before starting
the line. Enter this time as the slave time. To setting, press the button from the LINE screen.
(Line type settings are described in Chap.7.1.)
Button function:
move around items
change the blinking item (while holding auto load)
save the entered values and return to the LINE screen
return without saving
Set slave pulse line time in following format:
minute impulse line
hh : mm
half-minute impulse line
hh : mm: 00 or hh : mm : 30
seconds impulse line
hh : mm : ss
